2019, 04/08 21:04 (2076day) Posted | 2074day Updated

We are currently confirming an issue where it may not be possible to connect to the push server (unable to establish a push connection from OBS, etc.) in some broadcast slots.
If a problem occurs, we apologize for the inconvenience, but please reschedule the broadcast and try again.
We apologize for any inconvenience this may cause.

Added on 04/08 22:40 <br>We have fixed the problem areas and strengthened the checking function, and are currently checking the improvement status.

Added on 04/10 22:40 <br>The correction has been completed. We apologize for the inconvenience.

2019, 04/03 03:08 (2082day) Posted | 2082day Updated

・The default push server has been switched to a new version <br>The new low-latency push server has become the official version, and all streamers now connect to the new push server by default.
This push server has a broadcast delay of about 0.5 to 1 second. (*When using Chrome browser in a stable environment)

Please note that not only the push connection destination server but also the stream name will change depending on the broadcast slot.
We recommend using automatic settings.

・Simplified settings have been added to the broadcast list on the top page <br>You can hide icons and titles displayed in front of the broadcaster name.

2019, 03/29 09:38 (2087day) Posted | 1796day Updated

When the broadcast frame (comment column) is merged with the joint distribution function, each other's distribution video is now displayed in picture-in-picture.



・Picture-in-picture (child distribution) can be resized and moved freely.
・If you do not need it, you can hide it from the icon at the bottom of the parent video, and press the icon again to display it again.
・The volume of the child broadcast will be played in a muted state, but you can also set the volume separately from the parent broadcast.
・You can switch only child distribution to low image quality mode.
・It will be displayed as a picture-in-picture even in Timeshift, and the child stream will automatically seek to the position where the parent stream was sought. (Also compatible with past distribution)
-The PC version supports live broadcasting and time shift, and the smartphone version (app only) supports live broadcasting.

In addition, it was necessary to specify the join of the broadcast slot when acquiring the broadcast slot, but now it is possible to join at any time by using the "/join" and "/join" commands.
Both of them have already registered as co-distributors, and when both have acquired broadcast slots, one of the distributors can use commands to join.
(By using commands, it is now possible to join streaming from a smartphone app.)

Please see below for the co-distributor function and comment column sharing function.
https://magical.kuku.lu/?2850

When using "kukuluLIVE VirtualCam over Network", PinP is not required, so it will be turned off automatically.
https://magical.kuku.lu/?num=3512

2019, 03/28 17:55 (2088day) Posted

-Improved the PC version viewing system <br>In environments where the line is stable, the latency is lower than before and the loading wait time is also shorter.

・Messages related to push connections have been made more subtle. <br>Push connections are no longer mentioned in the viewer comments section, and if there is no push connection, the player will now see ``Waiting for streamer.'' .
It will be displayed as usual in the comment section of Coffret and your own stream.

2019, 03/20 09:23 (2096day) Posted | 2096day Updated

Newly added servers will be replaced with newer version viewing servers.
All viewers will be able to watch on the new version of the viewing server around the evening of March 20th.

The following points have been improved compared to the previous version.

・Improved behavior such as buffering immediately after starting viewing or buffering that takes several seconds ・Improved unstable operation such as disconnection during busy hours ・Improved delay ・Improved sound deviation ・Improved viewing on some NEC routers Improved stability issue (under confirmation)

2019, 03/20 00:03 (2096day) Posted | 2096day Updated

・An anti-fraud countermeasure has been added for the Nade Nade mode .
We have introduced a countermeasure against vandalism that displays the icon even when it is disabled.

- Stroking mode now supports Timeshift <br>Stroking modes used after this update will also be displayed in Timeshift.

・Added a restriction function to Nade Nade mode <br>If the streamer turns on Nade Nade mode with the "/nade owner" command, only you and co-streamers will be able to Nade Nade. Masu.
General viewers cannot stroke it and can only view it.
For example, you can have a co-broadcaster point it to you during a presentation or event.

・Added a setting to disable stroking mode .
It will not be displayed even if the broadcaster turns on pat mode.

2019, 03/16 21:43 (2099day) Posted | 2099day Updated

-Push server now supports IPv6 connections (for broadcasters)
Since the push server now supports IPv6, connections can now be made using IPv6 in environments where AAAA can be retrieved from DNS.
The IPv6 PPPoE environment avoids IPv4 congestion, which is very effective during busy hours.
Even in MAP-E and DS-Lite environments, there is no need to go through BR, so you can expect a reduction in latency depending on the location.

-Added settings to use the new push server (for broadcasters)
If you switch from "Push server version" to "New version" on the settings page below, you will be able to use the new push server.
https://live.erinn.biz/login.live.config.php
The format of the push destination address for the new push server is in the general format (hostname/app), so
You can connect from more encoders, including embedded libraries.
Further development is underway with the aim of improving stability and accommodating rate, and using new codecs.

・Improved the high-definition viewing server <br>In order to prevent buffering and disconnections even during busy hours in high-definition mode, we have reduced the capacity and significantly increased the capacity.

2019, 03/15 00:47 (2101day) Posted | 2097day Updated

"Nade Nade Mode", a very popular (?) feature of MagicalDraw, which was born and raised on kukuluLIVE, has returned home.

When a streamer uses the "/nade" or "/nade" command in the comment section of their stream,
"Pat mode" is enabled,
Everyone, including viewers, will be able to "pat" the broadcast screen.
The smartphone version can be used in exactly the same way as the PC version.


Other people's "pats" are visible to everyone.
If you wish to hide it, please turn off the comment overlay ([1] in the image above) or disable it below.

The default pointer for "pat" is "patte", but
From the top right menu of the comment section → "Display" tab → "Nade Nade Pointer",
You can also change it to your favorite emotion image.

*Emotion settings depend on the broadcaster settings. It cannot be used for distribution without permission.
* If you turn on "Disable stroking mode", the stroking function will not be used even if the broadcaster has turned it on.

By using "Nade Nade Mode", you can do the following things that were not possible before!

・Pet the kitty broadcast by the cat ・Pet the streamer who broadcasts the camera broadcast ・Poke the wonderful illustrations distributed by the drawing stream ・Solve Saize's spot-the-difference puzzle together ・Pet the game character ・Pet the cat ・Play the True/False quiz Held on the screen (Good if you prepare 〇 and × emotions)
・ Hit with something like a crowbar (utilization of default emotion)
・Set the distribution screen to the sea (utilization of tuna emotion)
・Give a snack to the cat (Churu Emotion)
・ Playing with cats (Nekojarashi Emotion)
・Stroking the cat

*This feature is in beta version.

2019, 03/12 04:17 (2104day) Posted

We have improved kukuluLIVE's auto tag function, even in environments without Coffret (smartphone distribution) and video capture environments.
By entering the game name and content of the distribution in the title of the distribution, the corresponding game, software, etc. will now be automatically tagged.

You can add multiple tags at once by filling in a combination of multiple games, purposes, etc.
If you do not want to change the title, treat the first line of the distribution description in the same way as the title.

You can quickly change the title etc. by using the command "/title new title" or "/desc new distribution description" in the comment section.

2019, 03/04 02:48 (2112day) Posted

・Animated images can now be used for self-made stroking pointers
APNG or animated GIFs are now available.
APNG is a still image in IE/Edge, so we recommend animated GIF.
Please use the online tool below to generate images.

Magical Converter
https://i.kuku.lu/

The following bugs have been fixed.・Fixed the issue where the stroking pointer was misaligned when zooming.