2019, 05/16 01:05 (2467day) Posted | 2467day Updated

- Multiplexed time-shifted server clusters <br>In addition to the existing server cluster, we added another cluster of exactly the same servers.
Improves fault tolerance by automatically switching to the remaining cluster in the event of a failure.
It is no longer necessary to stop the recording progress of live broadcasts during maintenance.
The processing capacity has also doubled, making it more comfortable to use even during busy hours.

・We have extended the storage period for Time Shift. <br>As the storage has doubled (200TB) due to cluster multiplexing, we have extended the storage period for Time Shift.
Basic storage period (if the recording has not been played back at all): 30 days → 45 days Basic storage period (if the recording has been played back once or more): 50 days → 65 days Extension of storage period per recording and playback: 10 days → 15 days

2019, 05/11 07:19 (2472day) Posted | 2472day Updated

・New time shift server <br>You can now watch comfortably even during busy hours, and the seek response has improved.

・The old Flash version time shift player has been discontinued <br>The old Flash version time shift player was supported for compatibility.
It can no longer be used even when compatibility settings are enabled.
You will not be able to watch in IE on Windows 7 or lower. Please use another browser.
In addition, on Windows 8.1 or later, you can view it with HTML5 player even in IE.

2019, 05/07 22:40 (2475day) Posted | 2475day Updated

The recording server reinforcement work ended at 4:50 AM.
Thank you for your cooperation.

We will continue to make improvements to ensure comfortable viewing even during busy hours.
We apologize for any inconvenience caused by maintenance, and appreciate your understanding and cooperation.

---

Due to the load on the recording server (recording and time-shift viewing) reaching its limit during busy hours,
We have decided to increase the number of servers, separate roles for each piece of equipment, and add new servers.

As a first step, we will carry out reinforcement work on existing equipment according to the schedule below.
May 8th from 3am - Scheduled for up to 2 hours *Postponed by 1 hour

The following functions will not be available during work.
- Live broadcasts cannot be recorded. - Time shift cannot be viewed. - Low resolution mode is not available.

After the above expansion is completed, we plan to separate the roles of each piece of equipment and install new servers.

We apologize for any inconvenience this may cause and appreciate your understanding and cooperation.

2019, 05/05 17:29 (2477day) Posted | 1286day Updated

The latest version 2.3.4.0 of kukuluLIVE Coffret has been released.
This version includes the following changes:

-Added a variable (tag) for comment reading. <br>A new variable (tag) can now be used in Comments → Comment reading → Dialogue settings → Dialogue text.
For more information https://kuku.lu/s2e9ad8

-Added a variable (tag) for external transfer of comments <br>It is now possible to transfer the name of the handshake, distinguishing it from the identification number.
For more information https://kuku.lu/s3122e8

With this version update, your antivirus or SmartScreen may prevent Easy Setup from launching (until the new binaries are on safelists).
In that case, we apologize for the inconvenience, but please set the exclusion settings so that "Coffret.exe" can be executed properly.

2019, 04/28 09:27 (2484day) Posted | 2484day Updated

On the "Trend" page, you can check popular games and content on kukuluLIVE.

The games and content played by the distributor are displayed in ranking format for each of the following indicators.
・Broadcast time (total time the content was played)
・ Number of broadcasts (the number of broadcasts in which the content was played even for a moment)
・ Number of distributors (the number of distributors who played the content even for a moment)
・Viewer index (accumulated number of viewers who watched the content continuously while it was being broadcast)

trend
https://live.erinn.biz/live.trend.php

2019, 04/14 08:35 (2498day) Posted | 2493day Updated

We have released version 2.3.2 of the distribution app "kukuluLIVE Encoder 2 (iOS version)".

・GPS accuracy has been improved <br>Positioning will switch to car navigation mode, and positioning will be performed correctly even when moving at high speed.

・You can now freely change the orientation of your device between landscape and portrait while streaming. Now you can freely change the direction just by changing it.
Even if the screen is vertical, you can now view it horizontally by cropping the center part.

・You can now stream with higher quality settings <br>Supports video encoding settings up to 2Mbps.

-Improved so that the comment number is not read aloud.
・Fixed an issue in v2.3.0 that could significantly exceed the set bit rate

kukuluLIVE Encoder 2 (iOS version)
https://itunes.apple.com/jp/app/kukululive-encoder/id818652205?mt=8

*Compatible with iOS devices with iOS 11.3 or later

2019, 04/09 20:08 (2503day) Posted | 2502day Updated

We have revised the kukuluLIVE broadcast guidelines.
The only addition is "1-7 Prohibition of Dangerous Activities," and the only other changes are to the description method and numbering.
https://live.erinn.biz/login.live.php?rule=1

2019, 04/08 21:04 (2504day) Posted | 2502day Updated

We are currently confirming an issue where it may not be possible to connect to the push server (unable to establish a push connection from OBS, etc.) in some broadcast slots.
If a problem occurs, we apologize for the inconvenience, but please reschedule the broadcast and try again.
We apologize for any inconvenience this may cause.

Added on 04/08 22:40 <br>We have fixed the problem areas and strengthened the checking function, and are currently checking the improvement status.

Added on 04/10 22:40 <br>The correction has been completed. We apologize for the inconvenience.

2019, 04/03 03:08 (2510day) Posted | 2510day Updated

・The default push server has been switched to a new version <br>The new low-latency push server has become the official version, and all streamers now connect to the new push server by default.
This push server has a broadcast delay of about 0.5 to 1 second. (*When using Chrome browser in a stable environment)

Please note that not only the push connection destination server but also the stream name will change depending on the broadcast slot.
We recommend using automatic settings.

・Simplified settings have been added to the broadcast list on the top page <br>You can hide icons and titles displayed in front of the broadcaster name.

2019, 03/29 09:38 (2514day) Posted | 2224day Updated

When the broadcast frame (comment column) is merged with the joint distribution function, each other's distribution video is now displayed in picture-in-picture.



・Picture-in-picture (child distribution) can be resized and moved freely.
・If you do not need it, you can hide it from the icon at the bottom of the parent video, and press the icon again to display it again.
・The volume of the child broadcast will be played in a muted state, but you can also set the volume separately from the parent broadcast.
・You can switch only child distribution to low image quality mode.
・It will be displayed as a picture-in-picture even in Timeshift, and the child stream will automatically seek to the position where the parent stream was sought. (Also compatible with past distribution)
-The PC version supports live broadcasting and time shift, and the smartphone version (app only) supports live broadcasting.

In addition, it was necessary to specify the join of the broadcast slot when acquiring the broadcast slot, but now it is possible to join at any time by using the "/join" and "/join" commands.
Both of them have already registered as co-distributors, and when both have acquired broadcast slots, one of the distributors can use commands to join.
(By using commands, it is now possible to join streaming from a smartphone app.)

Please see below for the co-distributor function and comment column sharing function.
https://magical.kuku.lu/?2850

When using "kukuluLIVE VirtualCam over Network", PinP is not required, so it will be turned off automatically.
https://magical.kuku.lu/?num=3512